INN07 GNSS

INNO7 GNSS

s900+ gnss receiver

S900+ GNSS Receiver Kit

G4 GNSS

G4 GNSS

INNO7 GNSS

INNO7 GNSS with Trimble Board, H6 Controller & Field Genius Android Software.
£4,750.00
In stock
SKU
INNO7 GNSS with h6 and field genius android

The INNO7 is equipped with a high speed 5G full netcom module which supports the latest 5G communication network and gives the RTK's high speed information interaction and wider expansion space in the big data era.

Based on intelligent PPP Dial up technology INN07 realises automatic dialing in real time and keeps online during working.

Use the inbuilt Radio only: It's not a deam to achieve 15km working distance by using the inbuilt radio.

Farlink Protocol: Inn7 adopts an internal radio with 3W maximum tansmission power to achieve the typical working range as 15km through 'Far-Link' protocol.

The transmission bandwidth becomes large which perfectly solves the problem of large data volume of multiple constellations transmission compared to the traditional RTK.

Touch Screen Interaction: HD1.54 inch color LCD touch screen with high brightness and low power consumption is more suitable fr field work which is convenient and efficient to complete touch settings, infomration browsing and function settings.

The fastest IMU (tilt Technology)

Shake the instrument a few times left-right, or keep instrument moving for a short distance, this procedure takes only 2-5 seconds around.

Re-activate IMU after 1-2s of moving, extremely fast. 

Both voice and software interface show the status of IMU

The IMU is working without moving in about 40 seconds

The IMU system is not affected by the magnetic field, so that surveyors don’t need to worry about the interference for accuracy by magnetic field environment (high voltage lines, large metal structures).

Specification

GNSS Features Channels 336, 1598 (optional)
GPS L1C/A, L1C, L2C, L2E, L5
GLONASS L1C/A, L1P, L2C/A, L2P, L3
BDS B1, B2, B3
GALILEOS E1, E5A, E5B, E5AltBOC, E6
SBAS L1C/A, L5 (Just for the satellites supporting L5)
IRNSS L5
QZSS L1C/A, L1 SAIF, L2C, L5, LEX
MSS L-Band Trimble RTX[1]
Positioning output rate 1Hz~50Hz
Initialization time < 10s
Initialization reliability >99.99%
Positioning Precision Code differential GNSS positioning Horizontal: 0.25 m + 1 ppm RMS
Vertical: 0.50 m + 1 ppm RMS
GNSS static Horizontal: 2.5 mm + 0.5 ppm RMS
Vertical: 5 mm + 0.5 ppm RMS
Long Observation Static Horizontal: 3mm+0.1 ppm
Vertical: 3.5mm+0.4ppm
Real-time kinematic
(Baseline<30km)
Horizontal: 8 mm + 1 ppm RMS
Vertical: 15 mm + 1 ppm RMS
SLink (RTX)[2] Horizontal: 4-10 cm
Vertical: 8-20 cm
RTK XTRa (xFill)[3] Horizontal: 5 + 10 mm/min RMS
Vertical: 5 + 20 mm/min RMS
SBAS positioning Typically<5m 3DRMS
RTK initialization time 2~8s
IMU tilt angle 0°~60°
Hardware Performance Dimension 15.3cm(φ)×10.6cm(H)
Weight 1.2kg (battery included)
Material Magnesium aluminum alloy shell
Operating temperature -25℃~+65℃
Storage temperature -35℃~+80℃
Humidity 100% Non-condensing
Waterproof/Dustproof IP68 standard, protected from long time immersion to depth of 1m IP68 standard, fully protected against blowing dust
Shock/Vibration Withstand 2 meters pole drop onto the cement ground naturally
Power consumption 2W
Power supply 6-28V DC, overvoltage protection
Battery 7.4 V 3400mAh rechargeable, removable Lithium-ion battery
Battery life Single battery: 16h (static mode)
10h (internal UHF base mode)
12h (rover mode)
Communications I/O Port 5PIN LEMO external power port + Rs232
7PIN LEMO +external USB(OTG)+Ethernet
1 UHF antenna interface
1 GPRS antenna interface (internal and external antenna switchable)
SIM card slot (standard)
Internal UHF Radio receive and transmit,
1W/2W/3W switchable, radio router and radio repeater
Frequency range 410-470MHz
Communication protocol Farlink, Trimtalk450s, SOUTH, SOUTH+,SOUTHx, HUACE, Hi-target, Satel
Communication range Typically 15km with Farlink protocol
Cellular mobile network Advanced 5G network communication module, downward compatible with 4G/3G
Bluetooth BLEBluetooth 4.0 standard, Bluetooth 2.1+EDR
NFC Communication Realizing close range (shorter than 10cm) automatic pair between receiver and controller(controller requires NFC wireless communication module else)
WIFI Modem 802.11 b/g standard
WIFI hotspot Receiver broadcasts its hotspot form web UI accessing with any mobile terminals
WIFI datalink Receiver can transmit and receive correction data stream via WiFi datalink
Data Storage/Transmission Storage 64GB SSD internal storage
Automatic cycle storage (The earliest data files will be removed automatically while the memory is not enough)
Support external USB storage
The customizable sample interval is up to 50Hz
Data transmission Plug and play mode of USB data transmission
Supports FTP/HTTP data download
Data format Differential data format: CMR, CMR+, SCMRx, RTCM 2.1,RTCM 2.3, RTCM 3.0, RTCM 3.1, RTCM 3.2
GPS output data format: NMEA 0183, PJK plane coordinate, Binary code, Trimble GSOF
Network model support: VRS, FKP, MAC, fully support NTRIP protocol
Sensors Electronic bubble Controller software can display electronic bubble, checking leveling status of the carbon pole in real-time
IMU Built-in IMU module, calibration-free and immue to magnetic interference
Thermometer Built-in thermometer sensor, adopting intelligent temperature control technology, monitoring and adjusting the receiver temperature
User Interaction Operating system Linux
Buttons 2-button and visual operation interface
Indicators 2 LED indicators, data interaction indicator and Bluetooth indicator
LCD 1.54-inch HD color LCD touch screen with resolution 240*240
Web interaction With the access of the internal web interface management via WiFi or USB connection, users are able to monitor the receiver status and change the configurations freely
Voice guidance The intelligent voice technology provides status and operation voice guidance, supports Chinese/English/Korean/Spanish/Portuguese/Russian/Turkish
Secondary development Provides secondary development package, and opens the OpenSIC observation data format and interaction interface definition
Cloud service The powerful cloud platform provides online services like remote manage, firmware update, online register and etc

H6 ANDROID CONTROLLER:

    ● Android Operating System, 64GB ROM
    ● 5" sunlight touch screen ● Full keypad, input faster
    ● 9200 mAh large capacity battery works more time
    ● 4G cellular module, dual sim card slot

H6 is SOUTH new generation  professional Android controller. It  is installed Android 8.1 OS and  adopts full keypad with  separate keys for 26 letters  and numbers makes the input in  the field more faster.

H6 as an Industrial controller has  rugged cover which reaches to  IP67. The device is waterproof  and 1.5m drop proof, your data  will be protected and the  reliability of the device in the  most challenging environments. In  addition, the 9200 mAh Li-ion  battery fulfills the long time  working time need. Dual nano SIM  card slots supports 4G network  bring perfect experience of high  speed net connection.

Integrated with various sensors,  like NFC, gyroscope, E-compass,  G-sensor, etc. New generation  Bluetooth V4.1 working distance  is more than 20 meters , the  advanced WIFI module makes the  working range up tp 30 meters in  good condition.