RSMP390M rotate/tilt with Copper Prism

RSMP390M can be quickly and easily stuck even to difficult surfaces, e.g. glass and marble façades, historic buildings, gas and oil pipelines, etc. or attached using plugs and screws. The base plates are also available in a magnetic design for easy fixing to steel fabrications. For this please add RSFP-X90 to fix to bottom of base plate.

RSFP-X90

• the prism can always be aligned accurately with the measuring instrument
• the prism can be turned in a radius of 180°, making it possible to use the same survey point from different directions
• bridges, façades and many other structures can be monitored even more quickly and precisely
• When robotic total stations are used permanent settlement measurements can be carried out during construction

When using mini prism RSMP390 in the ATR mode ranges of 
600 metres to 700 metres are obtained.

The ranges are dependent on the device and can be adversely affected by weather and environmental conditions.

When sighting measuring points that are already known, with robotic total stations it is possible to achieve ranges of up to 1000 m. Depending on the focus, ranges of approx. 200 m are achieved for measurements in manual mode.

RSMP390 with 25.4 mm mini prism: offset: -16.9 (minus 16.9), height of tilting axis: 45 mm

Also available for the prism is a protective cap. For this please add RSPC10

RSPC10

This product is also available with a silver prism. Please click here

To download the latest RS Targets & Monitoring Systems Brochure Click here