UNIVERSAL MOUNTING PLATE RSFP-X80g

The RSFP-X80G mounting plate can be glued to almost any substrate. (We recommend using RSMK-FIX Adhesive to glue the plates)

The prisms RSMP180, RSMP280, RSMP380 and the reflector marks RS183 can be clicked on and off the mounting plate easily.

Click into place, take your measurement and remove after the measurement has been taken, re-mount again if need be.

The prism of reflector marks can be attached to the mounting plate in all orientations; the measuring point remains the same. Readings can be taken from all directions.

Please note that you are buying the mounting plate only and not the prism target shown, these would need to be purchased separately.